Aplikasi
Tricone bit, nu sababaraha ogé bisa disebut roller congcot bit atawa tri-cone bit, boga tilu congcot.Unggal congcot bisa diputer individual nalika senar bor rotates awak bit.Congcot gaduh bantalan roller dipasang dina waktos assembly.Bit motong rolling bisa dipaké pikeun bor sagala formasi lamun cutter ditangtoskeun, bearing, sarta nozzle dipilih.
Giling bit huntu
1, Formasi lemes (114-117)
Bit ieu dirancang pikeun ngebor formasi panglemesna sapertos shales lemes, ranjang beureum, sareng liat, kalayan daya tahan anu luhur sareng tingkat penetrasi maksimal.
2, Lemes nepi ka sedeng formasi (121.124.126.134.136.137)
Bit ieu dirancang pikeun bor formasi kayaning shales, kapur lemes sedeng, sandstone Medium jeung formasi séjén kalawan corétan teuas intermittent.
3, Formasi sedeng nepi ka teuas (213.214.215.217)
Bit ieu dirancang pikeun ngebor formasi sapertos batu pasir keras, dolomit, sareng formasi rusak kalayan corétan cherty anu keras.
Pituduh tina Tricone Bit Pilihan
| IADC | WOB(KN/mm) | RPM(r/mnt) | FORMASI LAKU |
| 114/116/117 | 0.3~0.75 | 180~60 | Formasi pisan lemes kalayan kakuatan compressive lemah sareng drillability tinggi, kayaning liat, mudstone, kapur tulis, jsb. |
| 124/126/127 | 0.3~0.85 | 180~60 | Formasi lemes kalayan kakuatan compressive lemah sareng drillability tinggi, kayaning mudstone, gips, uyah, kapur lemes, jsb. |
| 134/135/136/137 | 0.3~0.95 | 150~60 | Lemes nepi ka formasi sedeng kalawan kakuatan compressive lemah sareng drillability tinggi, kayaning shale lemes sedeng, gips teuas, kapur lemes sedeng, sandstone lemes sedeng, formasi lemes kalayan interbed harder, jsb. |
| 214/215/216/217 | 0.35~0.95 | 150~60 | Formasi sedeng kalawan kakuatan komprési tinggi, kayaning shale lemes sedeng, gips teuas, kapur lemes sedeng, sandstone lemes sedeng, formasi lemes kalayan interbed harder, jsb. |
| 227 | 0.35~0.95 | 150~50 | Formasi teuas sedeng kalawan kakuatan compressive tinggi, kayaning shale abrasive, kapur, sandstone, dolomit, gips teuas, marmer, jsb |
| Catetan: Wates luhur WOB sareng RPM dina tabel di luhur teu kedah dianggo sakaligus. | |||
Pituduh tricone Bits PilihanTricone bits Huntu Tipe
Ukuran Bit
| Ukuran Bit | API REG PIN | Torsi | Beurat | |
| Inci | mm | Inci | KN.M | Kgs |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
Prosés Produksi
| Kuantitas Pesanan Minimum | N/A |
| Harga | |
| Rincian bungkusan | Paket Pangiriman Ékspor Standar |
| Waktos pangiriman | 7 dinten |
| Sarat pamayaran | T/T |
| Kamampuhan suplai | Dumasar Urutan Detil |
