Tricone Bit Perkenalan
Tricone bit mangrupakeun salah sahiji parabot utama pikeun liang blast sarta pangeboran sumur cai.Bentang hirup sareng kinerja na naha cocog pikeun pangeboran atanapi henteu, éta gaduh pangaruh anu hébat ngeunaan kualitas, laju sareng biaya proyék pangeboran.
Pegatna batu ku bit tricone nu dipaké di tambang gawé bareng duanana dampak huntu jeung geser disababkeun ku slippage tina huntu, nu mawa efisiensi pegatna batu tinggi jeung ongkos operasi low.
Bit tricone anu dikembangkeun sareng diproduksi ku JCDRILL utamina dianggo pikeun pertambangan terbuka skala ageung, sapertos tambang batubara open-pit, tambang beusi, tambang tambaga sareng tambang molybdenum, ogé tambang non-logam, pangeboran sumur cai.Kalayan ningkatna rupa-rupa jinis, éta ogé seueur dianggo dina quarrying, clearing pondasi, pangeboran hidrogéologis, coring, tunneling di jurusan transportasi karéta api sareng pangeboran aci di tambang bawah tanah.
Pituduh tina Tricone Bit Pilihan
| IADC | WOB(KN/mm) | RPM(r/mnt) | FORMASI LAKU |
| 114/116/117 | 0.3~0.75 | 180~60 | Formasi pisan lemes kalayan kakuatan compressive lemah sareng drillability tinggi, kayaning liat, mudstone, kapur tulis, jsb. |
| 124/126/127 | 0.3~0.85 | 180~60 | Formasi lemes kalayan kakuatan compressive lemah sareng drillability tinggi, kayaning mudstone, gips, uyah, kapur lemes, jsb. |
| 134/135/136/137 | 0.3~0.95 | 150~60 | Lemes nepi ka formasi sedeng kalawan kakuatan compressive lemah sareng drillability tinggi, kayaning shale lemes sedeng, gips teuas, kapur lemes sedeng, sandstone lemes sedeng, formasi lemes kalayan interbed harder, jsb. |
| 214/215/216/217 | 0.35~0.95 | 150~60 | Formasi sedeng kalawan kakuatan komprési tinggi, kayaning shale lemes sedeng, gips teuas, kapur lemes sedeng, sandstone lemes sedeng, formasi lemes kalayan interbed harder, jsb. |
| 227 | 0.35~0.95 | 150~50 | Formasi teuas sedeng kalawan kakuatan compressive tinggi, kayaning shale abrasive, kapur, sandstone, dolomit, gips teuas, marmer, jsb |
| Catetan: Wates luhur WOB sareng RPM dina tabel di luhur teu kedah dianggo sakaligus. | |||
Pituduh tricone Bits PilihanTricone bits Huntu Tipe
Ukuran Bit
| Ukuran Bit | API REG PIN | Torsi | Beurat | |
| Inci | mm | Inci | KN.M | Kgs |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
Prosés Produksi
| Kuantitas Pesanan Minimum | N/A |
| Harga | |
| Rincian bungkusan | Paket Pangiriman Ékspor Standar |
| Waktos pangiriman | 7 dinten |
| Sarat pamayaran | T/T |
| Kamampuhan suplai | Dumasar Urutan Detil |
