Tricone bit bubuka
The tricone bor bit teh pang populerna bit pangeboran di dunya, éta bisa loba dipaké pikeun Minyak & Gas pangeboran, Pertambangan, Cai Sumur, Éksplorasi géologis areas.Our tricone bit dibagi kana logam disegel bit bor jeung karét disegel bit.
1. The C-Center jet bisa nyingkahan formasi bal di bit, ngaleungitkeun wewengkon cairan di handapeun sumur, ngagancangkeun aliran luhur cuttings pangeboran sarta ngaronjatkeun ROP.
2. bantalan NBR jenuh tinggi bisa ngurangan tekanan sealing sarta ngaronjatkeun reliabiliti sealing.
3. Perlindungan G-Gauge ningkatkeun kamampuan pangukuran sareng manjangkeun umur jasa bit.
4. Nambahkeun barisan huntu antara taper pungkur jeung outflow pikeun motong borehole jeung ngajaga congcot.
Struktur bit Tricone
Pituduh tina Tricone Bit Pilihan
| IADC | WOB(KN/mm) | RPM(r/mnt) | FORMASI LAKU |
| 114/116/117 | 0.3~0.75 | 180~60 | Formasi pisan lemes kalayan kakuatan compressive lemah sareng drillability tinggi, kayaning liat, mudstone, kapur tulis, jsb. |
| 124/126/127 | 0.3~0.85 | 180~60 | Formasi lemes kalayan kakuatan compressive lemah sareng drillability tinggi, kayaning mudstone, gips, uyah, kapur lemes, jsb. |
| 134/135/136/137 | 0.3~0.95 | 150~60 | Lemes nepi ka formasi sedeng kalawan kakuatan compressive lemah sareng drillability tinggi, kayaning shale lemes sedeng, gips teuas, kapur lemes sedeng, sandstone lemes sedeng, formasi lemes kalayan interbed harder, jsb. |
| 214/215/216/217 | 0.35~0.95 | 150~60 | Formasi sedeng kalawan kakuatan komprési tinggi, kayaning shale lemes sedeng, gips teuas, kapur lemes sedeng, sandstone lemes sedeng, formasi lemes kalayan interbed harder, jsb. |
| 227 | 0.35~0.95 | 150~50 | Formasi teuas sedeng kalawan kakuatan compressive tinggi, kayaning shale abrasive, kapur, sandstone, dolomit, gips teuas, marmer, jsb |
| Catetan: Wates luhur WOB sareng RPM dina tabel di luhur teu kedah dianggo sakaligus. | |||
Pituduh tricone Bits PilihanTricone bits Huntu Tipe
Ukuran Bit
| Ukuran Bit | API REG PIN | Torsi | Beurat | |
| Inci | mm | Inci | KN.M | Kgs |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
Prosés Produksi
| Kuantitas Pesanan Minimum | N/A |
| Harga | |
| Rincian bungkusan | Paket Pangiriman Ékspor Standar |
| Waktos pangiriman | 7 dinten |
| Sarat pamayaran | T/T |
| Kamampuhan suplai | Dumasar Urutan Detil |
