Tricone bits Perkenalan
TCI tricone bit nyaéta bit pangeboran pang populerna di dunya, éta bisa loba dipaké pikeun minyak & gas, pangeboran sumur cai jeung wewengkon Éksplorasi géologis.
IADC ti 417 ka 837 tiasa nyumponan pangeboran formasi bédana anjeun.
Anjeun oge bisa ngabejaan urang formasi pangeboran anjeun, urang tiasa nawiskeun saran profésional bit tricone IADC.
Bit tricone pangeboran Wétan dirancang jeung dijieun nurutkeun standar API & ISO nu ciri anu umur panjang, efisiensi pangeboran tinggi jeung ongkos operasi low.
Ayeuna, urang tiasa ngahasilkeun ukuran bit mimitian ti 2 7/8 "pikeun 26" sareng aranjeunna tiasa diterapkeun kana formasi anu béda tina lemes dugi ka teuas pisan.
Pituduh tina Tricone Bit Pilihan
| IADC | WOB(KN/mm) | RPM(r/mnt) | FORMASI LAKU |
| 114/116/117 | 0.3~0.75 | 180~60 | Formasi pisan lemes kalayan kakuatan compressive lemah sareng drillability tinggi, kayaning liat, mudstone, kapur tulis, jsb. |
| 124/126/127 | 0.3~0.85 | 180~60 | Formasi lemes kalayan kakuatan compressive lemah sareng drillability tinggi, kayaning mudstone, gips, uyah, kapur lemes, jsb. |
| 134/135/136/137 | 0.3~0.95 | 150~60 | Lemes nepi ka formasi sedeng kalawan kakuatan compressive lemah sareng drillability tinggi, kayaning shale lemes sedeng, gips teuas, kapur lemes sedeng, sandstone lemes sedeng, formasi lemes kalayan interbed harder, jsb. |
| 214/215/216/217 | 0.35~0.95 | 150~60 | Formasi sedeng kalawan kakuatan komprési tinggi, kayaning shale lemes sedeng, gips teuas, kapur lemes sedeng, sandstone lemes sedeng, formasi lemes kalayan interbed harder, jsb. |
| 227 | 0.35~0.95 | 150~50 | Formasi teuas sedeng kalawan kakuatan compressive tinggi, kayaning shale abrasive, kapur, sandstone, dolomit, gips teuas, marmer, jsb |
| Catetan: Wates luhur WOB sareng RPM dina tabel di luhur teu kedah dianggo sakaligus. | |||
Pituduh tricone Bits PilihanTricone bits Huntu Tipe
Ukuran Bit
| Ukuran Bit | API REG PIN | Torsi | Beurat | |
| Inci | mm | Inci | KN.M | Kgs |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
Prosés Produksi
| Kuantitas Pesanan Minimum | N/A |
| Harga | |
| Rincian bungkusan | Paket Pangiriman Ékspor Standar |
| Waktos pangiriman | 7 dinten |
| Sarat pamayaran | T/T |
| Kamampuhan suplai | Dumasar Urutan Detil |
